Browse Forums General Discussion Re: Hyspan end bearing question. 5Oct 01, 2018 9:56 pm vegan pretty sure it'd be fine, it's not just the top plate taking that bearing pressure, you seem to also have 3 studs below also... Yes stud wise is pretty strong. 1 lvl and 2 f17 studs. Was just seeing the top plate as the weak link. Thanks. Minimum overhang into gutter must be 50mm, turn down tool should not split the sheet. it seems wrong tool for the profile was used, the flashing cannot slope back. Rib… 2 2117 Electrical just got back to me and said the most they can provide is a single power point on the Bedroom 1 side of that wall. After handover, your towel rail installer… 2 3837 |