Browse Forums General Discussion 1 Aug 26, 2018 6:24 pm Hi Attached is a photo of my letterbox, this and the adjacent low walls across the front of my property have been Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ finished with Acratex approximately 9 years ago as you can see there is a problem. My question is is it possible for myself to repair by removing all damage filling and recovering with a suitable cover without employing a professional ?? Any answers would be greatly appreciated... Re: Acratex bubbling and peeling 2Aug 27, 2018 3:36 pm Being 9 years old you're due for a re coating (Every 7-10 yrs recommended), there is some Acratex products which can be applied with a paint roller but texture might not match. I would visit a Dulux trade centre or call customer service on 13 25 25, they should be able to give correct advice. https://www.dulux.com.au/content/dam/du ... exture.pdf DIY, Home Maintenance & Repair Grind texture and paint off at blister up to top of fence Will see damp cement render 5 6257 DIY, Home Maintenance & Repair At a bit of a loss on this one - we're thinking the original owners never removed the protective laminate covers from their kitchen cabinets after installation and in the… 0 6317 I recently went through a similar renovation and move scenario when updating our family home. We also swapped some rooms around and tackled a major… 2 9752 |