Browse Forums General Discussion 1 Mar 18, 2018 8:50 pm Hi Looking to get a colourbond gate for a side gate to my place. About 1.1m wide and can be 1.5m high. Replacing an old wooden side gate which has rotted. Can you buy these things premade or colour bond to put together. Alternatively, does anyone have any good contacts that might be able to do this small job? Thanks in advance and look forward to your response. Joe Re: Colourbond gate 2Mar 20, 2018 3:07 pm What style are you after? ie slats, flat panel etc? I have a colourbond slat gate which I got through Smartslat. You can order and put it together yourself or they will put you onto someone who should be able to assist (which is what I did). My blog: tashandpaul.wordpress.com Re: Colourbond gate 4Mar 28, 2018 10:12 am We have slats - horizontal - (sort of brownish colour) - looks good. BUT - it has a black surround (ie frame). Makes it all stand out quite well. Also a good lock. I should have followed up on this thread. So, the pier foundation wasn't large enough on the side it was leaning towards, and the NBN cable went through the pier, just… 8 12123 Get some long brass machine screws and bolt right through the gate and put brass acorn nuts and washers on the other side. It will never come off 1 9074 Hi everyone! This is my first time posting here, and I'm looking for some advice regarding my house construction project in North Kellyville. I… 0 6695 |