Aug 09, 2017 5:59 pm
I am building a new home with Simonds. They poured the slab yesterday and there was light rain yesterday.
Today they have started putting the frame up and I don't think the concrete would have cured properly. The supervisor said it should be ok as they are not putting the roof on for a few days yet.
it is too early for the builder to start the frame?
Re: slab poured yesterday and framing started next day3
Aug 09, 2017 6:32 pm
Textbook says no but I have done it many times myself without adverse effect. If you are just walking on it and assembling light frames it should be Ok but i would not put a pallet on it.
Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog
Re: slab poured yesterday and framing started next day5
Aug 10, 2017 6:49 am
Not so.. you will need to check your wind loading category and plate-> Frame anchoring system
I've seen dynabolts & Hilti explosive anchors cracking slab edges ..please check for concrete cracking
around Impact anchors. No Fixings No loading
Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs
Sign in or Join to reply to this Topic
algernonFraming in old QueenslanderFraming in old Queenslander
Well, to be fair, this site has more of a focus on new home building, not renovating. There are other forums that focus on renovating - you're probably more likely to get…
StructuralBIMGuyStained framing panels ??? A problem ... GJ Gardner build Stained framing panels ??? A problem ... GJ Gardner build
Galleriamad Thanks for posting the photos Please check your engineering Plans/Notes under Wind loading category , Timber framing for Shear walls & Bracing May I also…