Browse Forums General Discussion 1 Sep 20, 2016 1:20 pm Hi Everyone, What is your external taps height and do you like them at that height? Would have preferred lower or higher? Re: External Taps Height 3Sep 21, 2016 11:23 pm Stewie D 900mm off the finished path or concrete level so you don't have to bend down and you can also get a decent sized bucket under them. Stewie I have found most taps too low (around 600mm) I'd agree 900-1000mm would be best. The Harder You Try - the Luckier You Get ! Web site http://www.anewhouse.com.au Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house. Bathroom renovation will likely include a back-to-corner bath and we’re considering a freestanding tap with hand-held shower such as the picture included. My hesitation… 0 22702 Unless the room is for storage then it's non compliant BCA V2 2019 S3 P3.8 You have 2 options 1. The builder deconstructs the section and rebuilds as per plan /… 7 7324 ok thanks - yes was wondering if that should have been listed as Option Three! 2 6203 |