Browse Forums General Discussion Re: Labour Cost per Sqm for decking 3Oct 29, 2015 8:52 am It depends on what's involved? Is it a difficult job, what are the specifications, size, engineering, access,height above ground, certification, etc,etc? Beware of low preliminary cost$ M2 rates..because it will be FROM $/M2...then PLU$,PLU$ on site costs Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs Re: Labour Cost per Sqm for decking 4Oct 29, 2015 9:05 am I've been getting quotes for a 110sqm deck, 1.8m above ground at the highest point. The labour cost has been quoted at $600/day for 1 senior and 1 junior chippy. Materials on top. Building the Denver by Metricon on acreage Land settlement: 24/8/15 Contracts: 8/7/16 Finance approved: 5/8/16 Council approval.....? viewtopic.php?f=31&t=79213 Petercurtis You able to contact the certifier and get a copy of your structural plans, if they are not in your contract. If your home was approved via CDC then they… 1 19180 Hi, as per the subject. Does anyone have any recommendations for the best value decking oil (Bunning is close to where I live) for a treated pine deck? Thanks 0 10940 |