Browse Forums General Discussion 1 Aug 26, 2015 6:09 pm Hi guys, Im about to build my first house. browsing at balwyn area, VIC, I see that many houses have their doorbell/intercom and electrical box put outside their houses, on the brick fence. I want to do it like this. should I ask my builder to do it or the future gates/fence builder to do? Currently, the doorbell/intercom is located at the portico, and the electrical box in located on the left side wall of the house. So what could be the right approach to change it to the way I want it to be? Thank you. PS: is one junction box at the front and one at the back is enough for future automatic gate and lights. I meant how many power point can I connect to one junction box? Building Standards; Getting It Right! 1. optional, you can but normally just use the earth from the main switch board 2. should be enough but the distance determines voltage drop - sparky should work it… 1 28814 Hi everyone! This is my first time posting here, and I'm looking for some advice regarding my house construction project in North Kellyville. I… 0 6695 which 1) PoE based video intercom is best for two storey home. I am looking with two monitor, one in GF and another FF so someone in home can… 0 24958 |