May 27, 2015 12:56 pm
Hi all, I made a 3 sided pallet shed. It is quite strong etc. except for the front, which wobbles slightly. I currently have a diagonal bracing piece of timber and while that is on, it is extremely solid, but when it's off, at it will need to be so the horses (who the shed is made for) can enter. Any ideas?
Re: Wobbly 3 sided shed3
May 27, 2015 3:17 pm
I have installed one diagonal bracing wire, but unsure of effect, but I will try the other diagonal to see if that helps.
I built it similar to this one, but without any pallets at the front. No cladding yet, but roof on.
Re: Wobbly 3 sided shed4
May 27, 2015 3:37 pm
You will require bracing both diagonals on the roof, and the back wall.
Once the cladding is fixed that will also help to stiffen up the structure.
The Harder You Try - the Luckier You Get !
Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house.
Sign in or Join to reply to this Topic
StructuralBIMGuyInsulating 3 car garage/shedInsulating 3 car garage/shed
Hi m4cc4s Thanks for the Photos I recommend you insulate the walls & ceiling Batten (600crts) out the frame and put up plasterboard? Here's a quick breakdown of…