Browse Forums General Discussion 1 Feb 25, 2015 3:48 pm Hi All, I am about to embark on building my first retaining wall and need some advice. I have bought the APC Versawall blocks and am not quite sure how to build the internal corner using the standard blocks as described by the manufacturer. Has anyone built a wall using these and could post a pic of how they have done this? I have the correct blocks for the external corners but just cant get my head around the internal side of things. Here is how I'm thinking it needs to be: Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: Versawall Internal Corners 2Feb 25, 2015 5:45 pm What does the inside of the 'external corner' block you have look like. I might just be a corner - internal or external? Small footprint in Eliza Ponds, Spearwood WA Re: Versawall Internal Corners 4Feb 26, 2015 10:59 am Oh ok - yeah sorry I have no experience with this product. Maybe call the supplier or manufacturer? Small footprint in Eliza Ponds, Spearwood WA Thanks. Yeh ideally that would have been good, but have progressed too far now. Hoping some well placed internal walls fixed up into the battens will provide some… 2 5412 Thank you alexp79 and gommeqld for your advice, that's very helpful, thanks 3 7942 3 10213 |