Browse Forums General Discussion 1 Dec 17, 2014 8:27 am Our pavers have been sealed (approx 3 weeks ago), and they now have various stains on them which looks like they are from the sealing agent itself. The marks appear mostly like a 'shadow' that runs around the perimeter of each paver, ie in a 5cm wide band around each paver. Has anyone seen this before? 1) Does it normally go away by itself? 2) Alternatively is there something that can be done to make the pavers appear 'consistent', ie without the shadow Re: Pavers have been sealed, but have marks on them ! 2Dec 17, 2014 9:53 am my bet is that whoever did the sealing brushed around the perimeter,for some reason, then rolled the rest effectively giving the edges an extra coat. There is nothing in the various codes and standards that puts this requirement on the builder to do. I think that is what you are asking. Don't waste time trying to get… 5 2397 You have mandatory building inspections and privately engaged building inspections. The difference between the two comes down to inspecting the building so it's safe and… 3 18063 My door tends to rub against the frame during winter and I'm looking to fix it so it closes smoothly. Looking online on Youtube I'm seeing methods to fix the alignment and… 0 692 |