Browse Forums General Discussion 1 Aug 02, 2014 12:26 pm http://www.glosswood.com.au/ Want to replace plasterboard ceiling with glosswood, anyone know price per m2 installed? Re: How much is Glosswood installed per m2 to alfresco ceili 2Aug 03, 2014 9:29 pm I just looked up the red cedar gloss and it says it goes for "from $60/sq m". Worth it, I reckon. 19.03.14 - Land Settlement 15.04.14 - Building Permit 28.04.14 - Earthworks 14.05.14 - Slab Stage 20.05.14 - Frame Stage 11.06.14 - Lock Up Stage 03.07.14 - Fix Stage 15.08.14 - New Home Presentation Re: How much is Glosswood installed per m2 to alfresco ceili 3Aug 03, 2014 11:45 pm I am guessing that does not include installation? I am also curious to know how much it actually cost since my builder is charging me $2.7k(21 sqm) to have Glosswood for the alfresco instead of gyprock. We will be looking at doing it ourselves post handover if they are over charging us by a lot. Re: How much is Glosswood installed per m2 to alfresco ceili 4Aug 03, 2014 11:53 pm They are available in Bunnings as well. http://www.bunnings.com.au/our-range/brands/g/glosswood They make the room much easier to clean for one, reflect more light (if light colour tiles are used), and you dont end up with dust on the top edge of tiles (cause most… 3 7717 1) I had requested R6 ceiling insualtion batts, however I noticed that on some areas there are huge gaps which will allow hot air to sweep in, and also noticed black/grey… 0 918 The unit normally clips into a metal plate screwed to the wall, either plate is not flush, or unit not hooked in and could be hanging from the pipes partly, either might… 2 12568 |