Browse Forums General Discussion 1 Nov 20, 2013 5:22 pm Hi have been building a double storey home and have gone with Dulux Coventry course acratex application . Very happy with the whole job and our builder is awesome but we are quite unhappy that we chose Saudi Sand colour. We were told this would lighten but it has darkened. So after a lot of deliberation we have decided to recolour the exterior of the home with Impact. Our home is 412 sqm which will require 2 coats, scaffolding and lots of $$. Our home is [list=]Double Storey Coventry Course Facia : Monument Tiles: Monier Sambuca Window Frames : colourbond monument[/list] We are now going to paint the house in paperbark colourbond colour. Has anyone done this before? How has it ended up? Thank you [/b][/b][/b] Re: Dulux Acratex Coventry Course Render Colour Too Dark 2Nov 20, 2013 9:09 pm It shouldn't be too much of a problem. You can get a different colour topcoat. Just make sure it is Dulux 955 Acrashield. This is similar to a paint coat (applied by roller) but is designed as a protective layer for over acratex. Dulux give a 15 year warranty if it's applied at the same time. We were quoted $22/sqm. Hi Alex, Thanks for the reply again. I had a chat with the builder, he said he will use primer, then hydrotec which comes with colour and sealer as well. A Renderer I… 12 14411 Have look at your house plans and you will probably find that brick articulation joint has been missed. Maximum allowable spacing is 6M or 5.5M for a wall with window… 17 16719 Hi, We have warm light throughout our house and it sort of makes are already dark stained floor more darker. We always wanted a lighter colourwd flooring but it turned… 0 21472 |