Aug 18, 2013 2:44 am
I jut moved in a single storey home that equipped a fully electric gravity fed rooftop hot water system from the early 1970s.
It still works well, but provides extremely low hot water pressure and is basically unusable for doing the dishes or having a shower.
What is the easiest way to increase the water pressure from the tanks on the roofs to all the taps/hotwater tanks in the house?
I know a new HWS would do, but i'm tight on budget. Any help greatly apreciated....cheers
Re: Low Pressure gravity rooftop fed HWS, best solution?2
Aug 18, 2013 3:39 am
There are several small pumps sold for exactly that purpose.
3 in 1 Supadiverta. 0.75mm filter. No downpipes diverted. Can delete overflow pipe. Cleaner Neater Cheaper
Supa Gutter Pumper. An inexpensive gutter overflow solution.
Re: Low Pressure gravity rooftop fed HWS, best solution?3
Aug 28, 2013 12:48 pm
Yes, we've worked similar systems before.
Basically you are using the weight of the water in the tank to push the hot water out of the tap. If you want any real pressure you do need to replace the entire system, but yes SaveH2O is correct there are options to increase the water pressure. The hot water booster pumps usually only increase pressure by 100 kpa which is minimal. Most options on the market don't have a pressure switch to turn the pump on when you open a tap or can't handle the heat.
I hope that helps.
Sign in or Join to reply to this Topic
snowingIs a covered rooftop deck a storey?!Is a covered rooftop deck a storey?!
Thanks! That's helpful. It's along the line of my thought as well. So probably a pergola / vergola style covering would be a better choice then. As long as sunshine can…
SaveH2OWater mains pressure exceed 500 KpAWater mains pressure exceed 500 KpA
Didn't the plumber tell you that you had a valve or not? It would be unusual for one to fail. Just Google it so you can see what it looks like. They are invariably…
GaudiNew house: Pressure Limiting Valve installed on mains?New house: Pressure Limiting Valve installed on mains?
http://www.vba.vic.gov.au/__data/assets ... -Rates.pdf You likely have this already. If you don’t get a reply overnight, you can try calling the plumbing authority…