Browse Forums General Discussion 1 Aug 08, 2013 2:24 pm Hey guys, I have bought a second hand shed kit without the steel shed plans I found these steel shed plans for a 6 x 6m shed which seem suitable for what I need to put through council. has anybody had any experience with them? http://www.ebay.com.au/sch/dale-aidan88 ... 7675.l2562 Re: shed plans ebay 2Aug 08, 2013 7:03 pm do the plans match exactlly the shed kit you bought? If not it wont get it through council. Best bet is finding out who the manufacturer of the shed kit was and try and track down the genuine plans. The shed kit plans will also provide the required engineering stamp to verify it has been suitably designed Is it possible to render an old corrugated iron shed.I have heard that it can be done if it is covered with chicken wire first.Not sure of the ratio of the render mix and… 0 4960 Thanks. Yeh ideally that would have been good, but have progressed too far now. Hoping some well placed internal walls fixed up into the battens will provide some… 2 5516 Hi, I am sheeting the inside of a 5.7 x 8m shed with gyprock. Unfortunately the shed wasn't designed for internal cladding but I have been framing it up as strongly as… 0 3457 |