Browse Forums General Discussion 1 Jul 05, 2013 7:11 am Our building control system does not require pre plaster inspections, so why should you have one? I now call them LAST CHANCE INSPECTION. We do a lot of them for very good reasons. The following are just some items we look for but the real value is to have expert’s eye over your investment before it becomes covered up and to put builder on notice that you are looked after by a professional: more on http://www.buildingexpert.net.au/blog/p ... n-worth-it Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog i would suggest nothing is unreasonable for PCI. we did all sorts, including checking the hot water, checking all the GPO's had power, testing that the showers were… 9 79412 you need to understand the breakdown of warranties. 90 warranty is considered as minor defects rectification period where as the longer ones are more major/structural… 1 3866 Hi, I have this sewer inspection point sitting in an odd spot in the rear of my yard: https://imgur.com/ghLI98q What I'd like to do is put a firepit in that corner of… 0 3913 |