Browse Forums General Discussion Re: Evap Cooling Unit blows off roof, who pays? 21May 13, 2008 11:13 am At least we won't have to use it for a while with this weather My Blog... http://ahouseonthehill.blogspot.com/ Re: Evap Cooling Unit blows off roof, who pays? 22May 13, 2008 11:25 am Yeah good luck!!
We actually had a plumbing industry commision inspector come out and do an inspection of our heating and airconditioning unit. It was apparently a random inspection, but they found a couple of issues and served a notice on the installers to come back withing a certain time and rectify things. Im not sure if you can request them to come out yourself or not. Built Porter Davis "Dromana" 2007. Re: Evap Cooling Unit blows off roof, who pays? 23May 13, 2008 11:33 am vanderlay Im not sure if you can request them to come out yourself or not. Spoke to them last night & by the sounds of it, once I give him the Certificate Compliance #'s & details, they will send someone out to take a look. He was also quite shocked it had happened & hadn't come across it before. Mike. My Blog... http://ahouseonthehill.blogspot.com/ Re: Evap Cooling Unit blows off roof, who pays? 24May 13, 2008 11:37 am Firthy_26 vanderlay Im not sure if you can request them to come out yourself or not. Spoke to them last night & by the sounds of it, once I give him the Certificate Compliance #'s & details, they will send someone out to take a look. He was also quite shocked it had happened & hadn't come across it before. Mike. Good news. The guy that came out to us was very helpful. The fact they hadnt come across it before suggests its going to be an installation issue!!! (as we all assumed ) Built Porter Davis "Dromana" 2007. I had an old shower unit that broke on me and when I took it off, there were only 2 water pipes, instead of the normal 2 water pipes and a shower head pipe. S o I… 0 34206 I couldn't attached the photo for some reason. Here is the link to the photo https://pin.it/79jwdMp 1 1868 Get some long brass machine screws and bolt right through the gate and put brass acorn nuts and washers on the other side. It will never come off 1 5991 |