Browse Forums General Discussion 1 Sep 27, 2012 10:56 am Hi Guys,new to the forum. About to build a deck and pergola over, sheeted with this makrolon,channels,top and bottom end cap system. Roof run is 4000 x5000 (5 sheets wide) Top end is typical fascia spout set up,with no eaves. It is in a L corner. Sheeting has to be pretty well hard up under the existing spout,and back to the fascia. Anyone who has done this realises the end cap of the sheeting,5000 long has to go on last. What arrangement regarding the flashing/waterproofing ,and how do you get that end cap on, has anyone done before.? Thanks. Yeh ideally that would have been good, but have progressed too far now. Hoping some well placed internal walls fixed up into the battens will provide some… 2 5393 Hi everyone! This is my first time posting here, and I'm looking for some advice regarding my house construction project in North Kellyville. I… 0 6694 Ask yourself if the insurance company will be aware of the Reno. 4 7360 |