Browse Forums General Discussion Re: RINNAI or RHEEM continuous flow gas hot water system???? 14Aug 06, 2011 10:07 pm Testedbytime Please check with your plumber to see if your pipes can withstand temperatures higher than 50 degrees. I just asked my DH who is a plumber, he said they must be using crap pipe if it is not able to withstand high temperatures. You have to use copper pipe for the higher temperatures, but some of the cheaper builders will use plastic, these come in varying quality, so depends on the plastic pipe they use I want to build a decking to the drawn shape outlined in black. The problem is how close can I build to the gas hot water unit? Will I be able to build around it and be… 0 20219 the sun master is the solar heating to "warm" the water in the tank the S26 is your hot water system which will heat the water (25 degrees?) so with both turned on you… 2 12383 Good luck with it. I don't know what the cost of a nice bidet seat with a 25mm air gap will be but you are obviously deducting the cost of a RPZ valve and its… 9 6973 |