Browse Forums General Discussion Re: The Shed.... *Beware, lots of pics* 5Sep 10, 2007 12:23 pm Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: The Shed.... *Beware, lots of pics* 8Sep 10, 2007 1:32 pm Can't remember exactly what the costs were, but the budget (for permit) worked out about $11K and I think it finished near $13K or so. Those costs are not including labour and I already had most of the tools used. Also helps having relatives who are in the building game. I'm guessing to have someone build similar would cost double, but someone else may be able to confirm. Size is 5 metres wide x 7.5 metres long.
Biggest problem is finding the time to do it. Working 9-5 sort of only leaves weekends to get into it. Then you go out for a sunday lunch or something so you lose over half a day. Would I do it again, probably My land is 260m2 (10m x 26m) located in claymore NSW. Under campbelltown council. I know in general the following setbacks would apply ground floor side setback =… 0 6936 Is it possible to render an old corrugated iron shed.I have heard that it can be done if it is covered with chicken wire first.Not sure of the ratio of the render mix and… 0 4899 Thanks. Yeh ideally that would have been good, but have progressed too far now. Hoping some well placed internal walls fixed up into the battens will provide some… 2 5416 |