Browse Forums General Discussion 1 Sep 09, 2009 2:06 pm hi i have a large block 936 square metres and i need to replace all the fences which are 59m x 61m x 15m which comes to 135m i considered colorbond but no offence but i find it looks cheap and im going for a country feel for the house id love to know pricing on a 1.8m and 2.1 lapped timber fencing to be installed Cheers Re: Timber Fencing - Syd 2Sep 09, 2009 2:43 pm I think you'll find that pricing will need to take into account access, post excavation, etc so you might be better off calling a few fencing contractors for quotes. This website gives a price but they don't specify what height (well I can't work it ) http://www.alldayfencing.com.au/adfestimate.php Re: Timber Fencing - Syd 3Sep 09, 2009 4:09 pm Lap'n'cap in treated pine 1.8 meters high works out approx $38 per metre for materials (included morticed posts for 3 rails) without concrete or fastners. Not sure if palings are produced in 2.1 m lenghts, you may have to get 2.4s and dock them Engineering timber is certainly a less fuss option, times cheaper to supply and install and better withstands humidity. 1 15887 Need to remove glass panel out of concrete without wrecking the glass to get the spa room in, any recommendations on how to do that. Thank you 0 39035 We are at the stage on our build in Kilcoy, Queensland where we need to get our fencing installed but we cant get any contact details for our neighbours to give them… 0 6145 |