Browse Forums General Discussion 1 Aug 23, 2009 8:16 pm We need to construct a 2.4m high x 10m wide fence (no gaps) as a privacy screen. So my question is if we choose a paling fencing how deep would the footings need to be? The fence will be over a sewer main and if you check out my thread (link in signature) you will notice that we have a lot of rock on our block so going too deep might be an issue. If we used another material would it be easier with shorter footings? Re: Fencing Questions! 2Aug 24, 2009 7:57 am Standard depth is 600mm whether it be timber or Colorbond for a 1.5m or 1.8m You definately wouldn't go any shallower than that with a fence that high A 2.4m lap'n'cap treated pine fence (3 rail) will cost you about $43 per metre for materials. Re: Fencing Questions! 4Aug 24, 2009 4:21 pm we are talking 1940's sewer here..... so I wouldn't be sure what they would have done back then!! Need to remove glass panel out of concrete without wrecking the glass to get the spa room in, any recommendations on how to do that. Thank you 0 39034 We are at the stage on our build in Kilcoy, Queensland where we need to get our fencing installed but we cant get any contact details for our neighbours to give them… 0 6144 Personally, considering your layout (study/work desks in bedrooms), I don't think you have any other option but to leave NW windows and make them as big as possible e.g.… 7 10455 |