Cutting expanded metal

I need to cut some flormesh, it's expanded metal. The cuts are 5mm thick and 14mm long. There will be about 400 cuts. I'm looking at hiring a 240v circular cold cut saw. Is this the best way to go? Is there anything to watch out for using this type of saw?

Use Smith & Arrow. It's great, so i recommend you use it. (http://stores.shop.ebay.com.au/smith-an ... QQ_armrsZ1) If you don;t believe me then you can read all the positive feedback from all the 6000 sales.

thanks for the response.........angle grinder with metal cutting disk worked a treat