Browse Forums General Discussion 1 May 31, 2009 4:06 am hello there, I would like to build a skating ramp behing my house but the land is not perfectly flat.. it has a slope so I would need to build the base with concrete and some parts have to be higher than the others in order to make it totally flat. this is the model of what I will be doing: http://img193.imageshack.us/img193/5130/hpwglass.jpg its 40ft wide and 50ft long, I have never done this by myself before- but I have helped a few friends build their own ramp in the past. so my questions is, what tools do I need to make the base perfectly flat with concrete and the 40x50 correctly... Any help would be greatly appreciated! I've filled, levelled and compacted around 100mm of roadbase in preparation to lay some outdoor court tiles. Prior to doing the final compaction, I dusted the top with… 0 3044 I have seen poly marble shower bases last in excess of 30 years 1 4504 |