Browse Forums General Discussion 1 Apr 12, 2024 9:49 pm Hello, I am going to check with the VBA on Monday but I thought someone here might have the answer. I read somewhere that it is a requirement of Building Authorities and Australian Standards that acrylic baths that have a shower over need to be "fully supported with a mortar mix". I cannot find verification of this online. My contractor has drilled down the old mortar bed to fit the new bath in and he has filled with foam. I want to make sure that it complies with the regularions. Thanks Re: Regulations for shower over bath 2Apr 13, 2024 9:30 pm You need to reference the manufactures installation guide, your supplier may have strengthened the base where it is not required to sit on a bed. We are Expert Consultant's, and we are here to help. If you don't want to annoy the neighbours then simply get yourself some good head phones. For me the sound is much better using headphones. The NCC (National Construction… 1 26246 Bathroom renovation will likely include a back-to-corner bath and we’re considering a freestanding tap with hand-held shower such as the picture included. My hesitation… 0 24837 2 4581 |