Browse Forums General Discussion 1 Mar 25, 2024 7:43 pm Floors are less than 2 years old, have progressively been coming loose over the last 3 months. Coming loose on the long side of the planks, typically where 2 or 3 planks will meet. The tradie the building company sent me is useless and can’t tell me the reason why it’s happening… anyone seen this before? All I know is they are hybrid floors, came with the place when we bought it after development so wasn’t involved in choosing the product Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: Help! Why are my hybrid floors coming loose? 2Mar 26, 2024 1:22 am What type of mop are you using on the floor? We are Expert Consultant's, and we are here to help. ShaneG We have been doing heaps of hybrid floors lately. The hollowness is caused by low spots in the slab or subfloor. No slab or particleboard floor is going to be… 1 12108 ![]() We are doing heaps of hybrid at the moment and the cost sits between $60-65/sqm including installation. Stairs are around $90-100 each 1 5285 ![]() Hi all, we would like to install hybrid flooring but concerned after reading some negative comments. We have been looking at the Terramater Resiplank Corsica 8.5 in… 0 5325 |