Browse Forums General Discussion 1 Feb 20, 2023 9:11 pm HI i just had the fascias replaced on 1960's home and the old soffits dont reach the new colourbond fascia (usually the soffits fit in the groove - the tradesmen put on the fascias straight and square in the correct manner but the house is old and the soffits are not flat - there is gaps from 5mm -25mm all up the house from the edge of the soffit to the back of the fascia - so does anyone have any suggestions how to extend the soffits or cover the gaps ? thaks for the help Mark Re: soffits dont reach fascia Help to fix 3Mar 14, 2024 12:04 pm Be careful, the soffits may contain asbestos Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Hi, I have a double and whenever the wind picks up I can hear alot of banging in certain areas of the house. I've had a look round and can't see any obvious issue but… 0 10703 DIY, Home Maintenance & Repair If the railhead is so poorly fixed it is also likely that the railhead is also non compliant, what about overflows and sealing railhead to the gutters?. 3 6116 |