Hi there.
I'm pulling up my old deck which contains about 400 linear metres of hardwood battens. A previous owner installed them, so I'm not exactly sure which native timber they used.
I've included a couple of photos. Here is a fresh cut: Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
And here is a split:
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
If anyone can help identify which timber it is, that would be great.
Cheers.
WatchingStarredHistory
MembersPros
Browse Forums General Discussion Hoping someone can help. It's a 30 year old brick veneer house with a negative slope from the street. There's no effective drainage here except for a rubble pit at the… 0 5616 I've gone for pre-fab walls. I did it because I wanted to remove the idiot factor from the construction on site , control theft and reduce waste plus its supposed to be… 10 80637 It's MGP 10 which means every length has been machine graded to it's specified engineered strength. It may not look pretty and if you where hand picking your timbers you… 1 19022  |
Mirvac built…
