Browse Forums General Discussion Re: Pest Proofing Ventilation gaps in brick veneer home 2Oct 01, 2023 6:31 am lukeb0030 Hi all - i have some pests getting under my house. There are some larger points of entry which i will initally block off with Plywood, but i suspect some rodents could access the house via these ventilation gaps in my brick work (i assume they are for ventilation). Is there some product that i can use to pest proof these gaps with affecting the ventilation ? Any advice appreciated. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Brass fly wire, you will need to cut it, shape it and jam it into brick slots Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Metricon will tell you using angles like this is "accepted industry practice" This is BS, the wall opening is too big for the window and needs to be re-done. 15 7327 DIY, Home Maintenance & Repair fair question about the slope. Re soil I mean that it doesn't look like reactive clay which swells and shrinks with wetness/dryness. If the floors in your house are… 3 21938 We used pro clima walls and roof. It's a high quality product (good vapour permeability and water resistance) and can withstand UV for a long period of time. Pro clima's… 10 7599 |