Browse Forums General Discussion 1 Apr 10, 2023 7:30 am Hi Our backyard colourbond fence located on a busy road and it wobbles when cars drive pass it and when it is windy as well. It's colourbond and with 8 posts concreted in but the whole length of fence (7 panels x 2.3 = 16m) does like a wave as the wind hits it. I bought two metal stake pegs 2400mm similar to those ,,,temporarily support https://australianhardwoodstakeco.com.a ... r-pickets/ The fence is screwed to a timber boards on ground as can be seen on the attached pictures and they rotted How can I brace it properly to avoid its falling ? Thx Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Coming back to this.... When installing a pressure flashing, what fixings would you use (please give a link) ? Above Pedro said nylon anchors. Anyone have a preferred… 7 11830 Surely your designer has answers to all your questions? If so, it would be nice to include their answers here so we can all learn something. (Of course, always good to get… 4 3803 Hi We have a road close to our place and only an old flimsy wooden fence between us and the Neighbour closest to the road. Any ideas on a sound proof modular fence. Like… 0 7786 |