Browse Forums General Discussion 1 Jan 05, 2022 10:20 pm Does anyone know what happened to the internals of this oyster lamp? It was a wall hung unit that had a round cover with a rubber gasket for outdoor use. I opened it and immediately there was a thick grease/oil collected at the bottom of the fitting. The bottom light still works fine and it is a PLC type two pin fitting. The top looks melted but it doesn't look like it ever had any wiring going to it and there is a strange dangling lamp holder. Seems to work fine otherwise? https://1drv.ms/u/s!AvmFjt08wu3RgswopiJOVMxmhT1VGA https://1drv.ms/u/s!AvmFjt08wu3RgswmCBB6MyOeGHUPNQ https://1drv.ms/u/s!AvmFjt08wu3RgswnEKnrw4nHMl2htQ About a year ago, I embarked on a DIY project to construct an outdoor Pergola, which measures approximately 5.2 meters by 4.0… 0 29848 Natural stone tiles like slate, travertine, and limestone add a timeless, elegant look to… 0 28031 thanks. the above one is white Mat tiles and have gripness so going for this Mat tiles for both indoor and outdoor. Beaumont told it can be used in both indoor and… 2 1972 |