Browse Forums General Discussion 1 Jan 05, 2022 10:20 pm Does anyone know what happened to the internals of this oyster lamp? It was a wall hung unit that had a round cover with a rubber gasket for outdoor use. I opened it and immediately there was a thick grease/oil collected at the bottom of the fitting. The bottom light still works fine and it is a PLC type two pin fitting. The top looks melted but it doesn't look like it ever had any wiring going to it and there is a strange dangling lamp holder. Seems to work fine otherwise? https://1drv.ms/u/s!AvmFjt08wu3RgswopiJOVMxmhT1VGA https://1drv.ms/u/s!AvmFjt08wu3RgswmCBB6MyOeGHUPNQ https://1drv.ms/u/s!AvmFjt08wu3RgswnEKnrw4nHMl2htQ Thanks for letting us know. The programmer will have a look at this later today. 2 6684 About a year ago, I embarked on a DIY project to construct an outdoor Pergola, which measures approximately 5.2 meters by 4.0… 0 29607 Natural stone tiles like slate, travertine, and limestone add a timeless, elegant look to… 0 24710 |