Browse Forums General Discussion Re: Sydney Water SW easement requirement 2Mar 21, 2022 4:57 am HA_IP Most likely yes. You will need to have it pegged out and you will need a Sydney Water Service Coordinator. There is a list of approved designers available online. We just did a peg out in West Pymble and the cost was $1600 plus GST For encasement budget $1200-1300/lineal meter in the current market Cheers Simeon Architectural Homes & Duplexes - specialising in custom designing homes to your budget Get a Free Onsite Consultation Today or send a PM for information, questions or advice. Re: Sydney Water SW easement requirement 3Mar 21, 2022 9:18 am I just received my quote, my house is about 22m long, it costs just over $10k for encasement, I am not sure how long it is for. plus additional $10k for reinforcement and bridge footing etc, total for just build near the sewer over $20k. Re: Sydney Water SW easement requirement 4Mar 21, 2022 9:26 am Flamingo I just received my quote, my house is about 22m long, it costs just over $10k for encasement, I am not sure how long it is for. plus additional $10k for reinforcement and bridge footing etc, total for just build near the sewer over $20k. Flamingo That sounds right (obviously is if thats your quote ) We were paying around $1000/lineal meter last year and I was assuming the price had gone up my 20%. So in a PM I told the original poster to budget $25-30k depending on the size of the house, but it's great you have an up to date quote Cheers Simeon Architectural Homes & Duplexes - specialising in custom designing homes to your budget Get a Free Onsite Consultation Today or send a PM for information, questions or advice. Re: Sydney Water SW easement requirement 5Mar 21, 2022 9:43 am Ashington Homes Flamingo I just received my quote, my house is about 22m long, it costs just over $10k for encasement, I am not sure how long it is for. plus additional $10k for reinforcement and bridge footing etc, total for just build near the sewer over $20k. Flamingo That sounds right (obviously is if thats your quote ) We were paying around $1000/lineal meter last year and I was assuming the price had gone up my 20%. So in a PM I told the original poster to budget $25-30k depending on the size of the house, but it's great you have an up to date quote Cheers Simeon I always have trouble to understand Lineal meter and Sqm. builder added $10k for each item at tender stage, they pretty much spot on. I had no idea about these things' cost. additional piecing seems quiet expensive, "Additional Piering including reinforcement and bridge footing, due to slab being affected by the Zone of Influence of Sewer Main as per Engineers Drawings", I guess they just follow the engineers drawings. Thanks Draftroom that definitely helps a heap. We are still at the very early stage of planning to see what kind of house would fit on our plot. While we are on a… 3 15780 You should be able to encase the sewer but you will need it designed and approved and access to lot 580 to do the work 2 17168 You might be able to apply to divert the sewer at your expense. In NSW you would contact a Water services co-ordinator and they would give you advice as to whether or not… 1 16150 |