Browse Forums General Discussion 1 Sep 12, 2021 5:45 pm I'm looking at installing anticon 60 insulation in the walls of a shed that I'll be building on the next few weeks. Main reason is it won't require internal cladding and is relatively inexpensive. The shed has steel z purlins and will be clad with monoclad tin. Can anyone tell me what the compressed thickness is of anticon 60? I'm thinking the 16mm wall screws provided will be too short... any tips from people who might have attempted this are welcome! Thanks. Yeh ideally that would have been good, but have progressed too far now. Hoping some well placed internal walls fixed up into the battens will provide some… 2 5589 Hi, I am sheeting the inside of a 5.7 x 8m shed with gyprock. Unfortunately the shed wasn't designed for internal cladding but I have been framing it up as strongly as… 0 3513 DIY, Home Maintenance & Repair I'm in WA and our sandy soils make drainage a bit easier but this is what I'd be doing. Dig down to your footings and let the wall dry out. Clean it all well by brushing… 1 5341 |