WatchingStarredHistory
MembersPros
Browse Forums General Discussion  24 Aug 2020 4 New Poster 1 Sep 12, 2021 5:45 pm I'm looking at installing anticon 60 insulation in the walls of a shed that I'll be building on the next few weeks. Main reason is it won't require internal cladding and is relatively inexpensive. The shed has steel z purlins and will be clad with monoclad tin. Can anyone tell me what the compressed thickness is of anticon 60? I'm thinking the 16mm wall screws provided will be too short... any tips from people who might have attempted this are welcome! Because it only states 90mm not if it’s 45mm or 35mm and yes I do have the plans my question was specifically since it’s not the structural value and only to hold… 2 12956 DIY, Home Maintenance & Repair Turning this into my DIY shed makeover. I had a brickie fix the back wall up and it's rock solid now. I'm into ripping down the inside ceiling that was installed and… 1 21140 One corner of my shed slab will be directly over a 1400mm diameter concrete soakwell. Is it feasible to fill the soakwell with concrete then lay the shed slab over the… 0 6233 |
