Re: Identifying the level of Datum of the finished ceiling h2
Aug 18, 2021 2:18 pm
Your units are wrong 2400mm (millimetres)
AHD is 58.41m (Metres)
generally the FFL is 0c (0mm) , Brickwork 28c (2400mm) , etc
we use brick gauges in Perth HTH
Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs
Re: Identifying the level of Datum of the finished ceiling h4
Aug 18, 2021 11:17 pm
The RL's are set heights based on a datum.
Your Ground floor is 58.60m RL
If you add your 2700mm ceiling height and your 330mm upper floor depth (3.03m) it gives you the 61.63 which is your upstairs RL.
Your garage is at an RL of 58.41 so it's 190mm below your ground floor level.
Accessible Carpentry & Cabinets
Sign in or Join to reply to this Topic
arcadeltCan someone help me with identifying these render colours plCan someone help me with identifying these render colours pl
Might be Colorbond Monument, but hard to tell without a sample chip up against the wall.
Ashington HomesCathedral ceiling v flat ceilingCathedral ceiling v flat ceiling
Blazeitup That's a fair question, and I don't mean to dodge it, but I have to at the moment based on the lack of timber supply in different categories at any one given…
Chairmonkeydefinition of finished concretedefinition of finished concrete
Hi all, In the NCC V2 184.108.40.206 there is a variation for South Australia that says - (e) After vertical surfaces are stripped of formwork, slab edges must be finished prior…
Fore20Metricon : Roofs and bricks not finished after 5 monthsMetricon : Roofs and bricks not finished after 5 months
No. That's really bad. In 3 months with Fowler homes I have Slab, Roof, Bricks and Plumbing rough in all complete.
bluberryBuying land before finished developed-site feesBuying land before finished developed-site fees
The real estate was insisting that a subject to soil test would not be allowed once we paid the deposit, but i managed to get her to agree to let us soil test to check for rocks.