I’m planning to remove some walls inside my house to create an open plan between kitchen and living/lunge area. One of the walls sounds to be a load bearing wall and is about 5.5 meter long and the other walls are all around 1 meter or less. I have highlighted the walls that need to be removed in below drawing and to give you an idea of what I going to do.
The property is in Doncaster East 3109 and I was wondering if anyone could recommend qualified/licenced structural design engineer and builders to do this project?
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
FYI:
I spoke with local council and they advised me that I need to get a permit through building surveyor as they are not doing any permit anymore. So, I think the scope of my work is going to be as following:
1. Certified structural engineer to inspect the work and sketch the detail and determine beam sizes and installation methods and issue engineering document. |
2. Building surveyor to review and certify the engineering work and issue the permit. |
3. Licenced builder to execute the project as per engineering drawing/plan. |
I would really appreciate if you can recommend either here or through PM any structural engineer and builders that can do this work?
Thanks in advance for your time.