Jul 26, 2021 11:52 am
Just after some advice. I have this tall timber privacy screen that is attached to our deck (pictured). I have noticed that it sways
in the wind. If I touch it it will move back and forth. I would like to give it more support. I was thinking about fixing the top to the wall of the house (to the right of the picture) with some kind of brace (maybe 2 or three). Has anyone done this before? What is the product I would need to achieve this? The gap between the privacy screen and the house is approx 1 meter.
Sign in or Join to reply to this Topic
MelBrFootings for 2.7 metre tall Merbau Batten Screen FenceFootings for 2.7 metre tall Merbau Batten Screen Fence
We are putting in a 2.7 metre tall Merbau batten screen fence, that will have posts that go 90cm below the ground. What sort of concrete footings should be put in place…
montalbert_porterdavisPorter Davis Privacy LocksPorter Davis Privacy Locks
Hi All, I was just wondering what the Privacy Locks offered by Porter Davis were? On the WOS Brochure it shows quite an advanced lock, but when I read through some other…