Browse Forums General Discussion 1 Jun 27, 2021 9:53 am hi all. wish all is well in this lockdown. I building with Clarendon homes at the initial stage. ground floor ceiling height is 2750mm with internal door at 2340mm. i have requested to increase first floor height at 2600mm , with standard internal door height at 2040mm. i am wondering if this would make it look out of place given first floor height increased from 2450mm to 2600mm. does anyone have a picture showing 2600mm ceiling with internal door height at 2040mm.? thank you Re: ceiling height and door height selection 2Jun 27, 2021 8:44 pm Many display homes I looked at had 2700mm ceilings with 2040mm internal doors. The space above the doors didn’t seem disproportionately high. I would use 2340mm doors if the ceilings were higher though. i imagine you also have another contract with an architect? and yeah, whatever other's said about special conditions and appendices 16 16009 I personally think pivot door are over the top, as you said a bit impractical having a small useless section and poor insulation. I’m pretty happy with a 920x 2040 with… 1 159 Hi Kaiser85, We are building with Firstyle Homes. Our build has just started, slab pour is on Saturday (hopefully!). Their standard range is pretty good. We did our… 1 6493 |