Browse Forums General Discussion Re: Need advice from Draftmans or Roof designers 2Apr 15, 2021 10:10 am Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs Re: Need advice from Draftmans or Roof designers 4Apr 16, 2021 8:29 am Stewie D And the short answer is, yes you can with a little tweaking of the floorplan and also the roof. Stewie Hi mate, can you please recommend the modifications required to make it work. Any recommended small/medium builder designers here in Melbourne Victoria? Thanks 0 623 Minimum overhang into gutter must be 50mm, turn down tool should not split the sheet. it seems wrong tool for the profile was used, the flashing cannot slope back. Rib… 2 2128 Levelling compound Ardit is the best but buy a bag of sand and make sand dam to protect your wood floor 2 15255 |