Browse Forums General Discussion Re: get stuck in this limbo can anyone knows the right ans 2Sep 27, 2020 11:26 am looks like 500mm to me https://emedia.rmit.edu.au/dlsweb/Toolb ... ge_006.htm Re: get stuck in this limbo can anyone knows the right ans 3Sep 29, 2020 7:29 am 40 x the diameter of the steel reo is what I was taught in my apprenticeship many years ago and I believe this is still the standard. 40 x 12 = 480 so yes as per aussieta above 500mm would be the correct answer. Stewie I'm putting a new floor in my kitchen, slate flagging on a standard concrete slab. I have allowed for a bed thickness of up to 20mm to accommodate the different… 0 17539 They using concrete or timber sleepers? Timber or steel uprights? Any drainage behind sleeper? 3 5878 Thanks for that, the PVC pipe is still about 40cm below ground level and it sticks out of the sand with no end cap or anything on it just open pipe, is this the finished… 2 10466 |