Browse Forums General Discussion 1 Sep 13, 2020 1:31 pm Hi, I have a dux pro flo 55L system installed in 2008, its in a rental, the cold water pressure out of the taps is excellent but hot water not so much, it is a very noticeable difference with the tap fully on hot it just kind of dribbles out. Can you have a look at the photos and see if you think those devices might have filters that could be blocked? the non return isolation valve has the date of 2/1/1993 on it! lol so it probably needs replacing but can you confirm if these have filters? temperature is still excellent but I would like the hot water pressure to be almost the same as the cold or at least have a little more oomph to it. Sorry for one of the photos being blurry its a really tight setup in a little cupboard. Other background info, hot water heater is in Townsville Qld, city has excellent water pressure and apparently the water is considered "soft" here. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ If you can calculate the reasonable charged head from let's say 100mm below the gutter to the top of where the vertical riser's horizontal discharge pipe will be, that… 11 17530 First time building 2 storey home, is under construction (in Framing stage) in NSW. I have 3 toilets and need bidet spray in… 0 16853 |