Browse Forums General Discussion 1 Dec 07, 2022 4:25 pm Hi, We are getting solid timber floorboards installed and have the black plastic moisture barrier laid underneath battens. However, there are some 10-20cm gaps in some places around the edges and also some holes in the middle here and there, around 10x20cm. It also doesn't go up the wall for the internal walls. Just wondering if it's critical that this is fixed or is this common practice and fine? Thanks! Re: Moisture barrier 2Dec 24, 2022 10:32 pm The holes in the moisture underlay to the perimetre (1.5m) are the main problem areas, it is best not to have any holes but the perimeter ones will cause the most damage. We are Expert Consultant's, and we are here to help. these look like missing batts. Go up and take a look. But yeah moisure meter is a completely different tool 4 9791 Hi, I had a barrier reef pool installed less that 2 years ago and the gel coat is already fading. The colour is electric grey shimmer which isn’t available… 0 4194 |