Hello,
I've just had new carpet put in and now the doors don't open "properly". The bottom of the door hits the new carpet and I have to really force the door open. Obviously this is no good.
I'm thinking I take an electric planer to the bottom of the door, but is there a better/different way, or something else I should be doing instead?
Appreciate any help!
Resize internal doors after new carpet?
Page 1 of 1
Electric planer is fine.
Just plane the required amount off and then sand it smooth. I'd also reseal the new exposed edge with some paint.
Just plane the required amount off and then sand it smooth. I'd also reseal the new exposed edge with some paint.
Related
3/02/2024
5
Okay, then the choice is really about the build quality of the door itself which means the brand name. Sorry I can't recommend one or the other so best to rely on comments…
11/09/2023
3
I can help you with all that, you can PM me with details if you wish
1/04/2024
0
Any advice on a builder in NSW who is demanding an extra 22000k after the house is completed and contract paid in full .Standard HIA contract. Never received a variation.…