Window double glazing retrofit
Page 1 of 1
After some advice
We have bought a heritage listed house in Sydney on a busy intersection. We want to get windows double glazed. Likely have to use existing timber windows, but happy to change if cheaper. There are bay windows.
Have read a bit about retrofit etc but would appreciate advice/recommendations from others who have done same.
Thanks
Hi folks
After some advice
We have bought a heritage listed house in Sydney on a busy intersection. We want to get windows double glazed. Likely have to use existing timber windows, but happy to change if cheaper. There are bay windows.
Have read a bit about retrofit etc but would appreciate advice/recommendations from others who have done same.
Thanks
After some advice
We have bought a heritage listed house in Sydney on a busy intersection. We want to get windows double glazed. Likely have to use existing timber windows, but happy to change if cheaper. There are bay windows.
Have read a bit about retrofit etc but would appreciate advice/recommendations from others who have done same.
Thanks
You need to look at new windows because the windows and hardware will not be deigned to take the heavier and wider double glazed units. It may be possible to use aluminium windows provided they match the design of the timber ones.
Related
16/01/2024
13
This is one of the reasons I decided to go overseas for my double glazed windows. As the builder indicated, he's worked on many upmarket builds, these were the most well…
29/03/2024
6
For your reference Performance Labels: Window assemblies in housing, except timber windows, must be labelled so the label can be seen when it is in situ. For timber…