Grout Colour Sealing DIY Kits from Grout Perfect

Just thought we would let everyone know that Grout Perfect Australia is now selling DIY kits for new or old grout grout.

We have 24 colours for you to choose from and a application DVD for floors and walls. Please visit us at http://www.groutperfect.com.au for more info. If the DIY kit does not suit you than you may find a Grout Perfect specialist near you just go to our Find A Specialist page on our website.

Craig

Hi Craig

Would you recommend applying the Group Perfect product for a new floor?
Is it safe to use procelain tiles with coloured grout (e.g. Ardex FSDD 337 - Travertine http://www.tilegrout.com.au/home/ardex-grout-fs-dd and http://www.ardexaustralia.com/pdf_bro/0026.pdf )?

Also, what is the estimated cost of a kit? We have about 120m2 of main flooring to do and then the wet areas also.

Thanks,
Jaans

has any one used this product? what is their experience?

Hi Jaans

Sorry that I have not got back to your post as I have been on holidays.

Grout Perfects colour sealer is a must for new installs, the kits range from $38.50 up to $250 depending if you need to clean before applying. If you are sealing around 120 m2 than you will need 3 x 250 ml bottles that is if you have 600 x 600 porcelains which I am guessing.

Craig

Is is suitable for grouting inbetween glass pool tiles (for pool feature)?

Hi

Grout Perfects colour sealer is not designed to sit under water in a pool sorry.

Craig

@Craig

Thanks for your post earlier.
The guys have just finished the grouting today, floors and wet areas! How long does grout take to set / dry and how long should I wait before applying Grout Perfect?

Do you still think I need about 3x250ml for the main floors? They are all 600x300 tiles with a 3mm gap (same for wet areas).

I have two bathrooms where the walls tiled to the ceiling, do you reckon a bottle each is enough? I'm guessing that one bottle for the floors of both will suffice as that'll be a smaller surface.

• Main floors: 3-4 bottles in Oak / Malibu sand / Pewter 2:
  On the website it is difficult to guess the right colours - I'm trying to match the Ardex FSDD "travertine" colour of the grout?
  
• Wet Area walls: 1-2 bottles in White / Sandy
  
• Wet Area floors: 1-2 bottles in Jamoca / Brown (to match Mochiato)

Sorry for the 20 questions, I just wan't make sure I get it right.

Alternatively, I noticed you are in Brisbane (we are in Moggill). Would you be interested in doing the sealing of our tiles, and if so, what would you charge?

PS: I've just ordered the colour match swab kit to check them colours

Hi Jaans

The amount of sealer required depends on the size of the area ( floor ) you have. One 250 ml bottle is more than enough for each bathroom. I will post out to you today your colour swab brochure.

You will have to wait 48 hours before you can colour seal new grout.

If you wanted an applicator to do it for you they charge around $22 per sq metre for a 600 x 300 tile that includes cleaning as well.

Craig

Thanks Craig!

Hi does anyone have any experience with this product?
Thanks

We have just recently launched our new website www.groutperfect.com.au and now have 24 colours for you to choose from. Grout Perfect`s grout colourant is long lasting and keeps grout looking new. Perfect for the tradesman or DIY market. Please make sure your grout is recessed just below the tile before ordering.