Its hard enough finding folks that aren't cowboys. Found a business that I'm happy with to do the job but i'm scratching my head at the quote.
$9500 total.
- 71sqm installation of buffalo grass
- Excavate and prepare backyard and level it out (currently has a slope)
- Supply and install 8.4 lineal meter sleepers, 2 sleepers high at the back
- Supply of riverstone in front with boulders and plants / 19sqm
Without levelling the slope they said it would be around 7.5k.
Does this sound right?
Does this quote seem right? Turf + landscaping
Page 1 of 1
sounds pretty fair to me
Seems very fair.
Its hard enough finding folks that aren't cowboys. Found a business that I'm happy with to do the job but i'm scratching my head at the quote.
$9500 total.
- 71sqm installation of buffalo grass
- Excavate and prepare backyard and level it out (currently has a slope)
- Supply and install 8.4 lineal meter sleepers, 2 sleepers high at the back
- Supply of riverstone in front with boulders and plants / 19sqm
Without levelling the slope they said it would be around 7.5k.
Does this sound right?
$9500 total.
- 71sqm installation of buffalo grass
- Excavate and prepare backyard and level it out (currently has a slope)
- Supply and install 8.4 lineal meter sleepers, 2 sleepers high at the back
- Supply of riverstone in front with boulders and plants / 19sqm
Without levelling the slope they said it would be around 7.5k.
Does this sound right?
They using concrete or timber sleepers? Timber or steel uprights? Any drainage behind sleeper?
Related
17/06/2023
0
I'm putting a new floor in my kitchen, slate flagging on a standard concrete slab. I have allowed for a bed thickness of up to 20mm to accommodate the different…
7/04/2024
2
Thanks for that, the PVC pipe is still about 40cm below ground level and it sticks out of the sand with no end cap or anything on it just open pipe, is this the finished…
8/11/2023
3
hey there! 😊 so, it’s kinda common for standard drawer depths to be around 500mm since most cabinets use this size to fit the usual runners…