Hi all
I've got 3 levels of plants totalling approx 7ft that I want to add some drip line irrigation to.
The tap is at the bottom so I was curious how someone with some experience might tackle this.
I was considering running a line to the top and add a pressure reg if needed then run all the drip lines down from there.
Fortunately the tap has quite a high flow rate.
Thanks
John
Irrigation along tiered retaining walls
Page 1 of 1
Related
3/07/2023
3
Firstly the ableflex that has been installed needs (manufactures specification) a sealant cap over the top, preventing water draining down between the slab and the…
30/10/2023
0
Hi all I am looking to run a water line under my concrete footpath which is directly next to my home, was seeing if this is possible without cutting the entire section…
2/04/2024
0
Hi Brainstrust, I had a go at creating my own irrigation plan, keen to get some feedback. It will be run from one 750-800W pump, off 2* 5000L rain tanks. Each zone…