Building Forum›DIY, Home Maintenance & Repair

Trying to replace roof sheets - cant identify roof profile

Page 1 of 1

Mar 03, 2020
7:18 am

Morning guys,

I have recently purchased a commercial shed. I have had a roofer inspect and told me I need to replace some roof sheets.

The style of sheet seems similar to klip-lok, but the actual clip bracket to hold the sheet down is something I've never seen before.

I have attached photos of the sheets profile as well as the clip underneath the roof sheets.

Does anyone have any ideas what profile it is?

Sheet length is around 510mm, height is 43mm.

Any help would be greatly appreciated

MClark

Mar 04, 2020
6:24 am

https://www.google.com/url?sa=t&source= ... -R8GzAAdWs

Looks like topdek

Revinator

Mar 12, 2020
2:38 pm

"KLIP-LOK classic or 700 series" is another you can look at.

Andrew.logan

Aug 24, 2021
8:02 am

Found this. Could be the same. I’m looking for the same profile to replace a sheet as well.

https://www.stramit.com.au/products/roo ... d-decking/

BuildingandLegal

31/05/2024

Structafloor/subfloor laying question 3600x800 sheets.

General Discussion

As above, you will need to trim your sheet to land on the joist, also make sure you are running your length at right angles to the joists

building-expert

17/08/2023

26 year old Colorbond roof. Repaint or replace?

Renovation + Home Improvement

Your house roof does not show rusting other than some surface rust on the flashings. In my opinion you dont need to replace or paint the roof other than treat surface rust…

De Silva

9/07/2023

Builder trying to place a downpipe on front elevation

Building A New House