durring the process putting on template, it got blew by the wind. so now its dried and got some colour hardener sticking on the the parts where suppose to be white.
I am seeking some advise from the members of Homeone who can think of some ideas to get rip of? pressure wash?sand it off?
concrete stencil DIY template failed off,anyway to repair
Page 1 of 1
hi guys this questions requires some technical acknowledges of working with cement,.. i guess there's no such a forum member here?
updates:
Found a good way to get rip of the colour hardener which has leaked to the gaps, apply turf or concrete which soften up the hardener, then use a chisel or flathead screw driver, half hour to 2 hours job
Found a good way to get rip of the colour hardener which has leaked to the gaps, apply turf or concrete which soften up the hardener, then use a chisel or flathead screw driver, half hour to 2 hours job
concrete sealer*
Related
9/05/2024
1
how on earth did that happen? the tiles need to be replaced, I’d be checking the concrete slab too, either tile needs to be loose or the slab cracked I would think
19/01/2024
0
Last year I had a gas leak at my house. 3 days later, I have about 1 sqm of my exposed aggregate paving broken up. I am not sure how to go about getting it repaired…