Home
Pros
Forum
  • About
  • Join Community
  • Contact
Reply
WatchingStarredHistory
InboxSent
MembersPros
#Unanswered     #Active
Posts
Foma2
18 Posts

Follow
Posts
Foma2
8 December 2024
1
Dec 08, 2024 3:23 pm
The house is 20 years old. Do I have to worry about worn out concrete slab next to the entrance into garage ? https://forum.homeone.com.au/u/3987_1733635390.jpg https://forum.homeone.com.au/u/3987_1733635399.jpg
The house is 20 years old. Do I have to worry about worn out concrete slab next to the entrance into garage ?
Read PostLike
Foma2
9 July 2024
12
Jul 09, 2024 12:13 pm
Good suggestion but cannot be used in my case as facia and pergola are next to each other.
Good suggestion but cannot be used in my case as facia and pergola are next to each other.
Read PostLike
Foma2
1 December 2020
3
Dec 01, 2020 10:59 am
Hi everybody. I just want to provide a long-awaited update on my issue. I managed to buy a gas oven rubber seal for Franke DG96M from a store which is called uBuyOz. They charged me $64.90 which is quite a good price from my perspective. I am still puzzled why uBuyOz have those seals and Franke Aust...
Hi everybody. I just want to provide a long-awaited update on my issue. I managed to buy a gas oven rubber seal for Fran...
Read PostLike
Foma2
17 April 2020
10
Apr 17, 2020 9:16 pm
Thanks a lot for your input, everybody. I'll try using a plastic spatula (cut to the size) and than a blower.
Thanks a lot for your input, everybody. I'll try using a plastic spatula (cut to the size) and than a blower.
Read PostLike
Foma2
12 April 2020
5
Apr 12, 2020 10:48 am
Thank you but it looks like it is more suitable for blocked pipes rather than cleaning gutters from leaves.
Thank you but it looks like it is more suitable for blocked pipes rather than cleaning gutters from leaves.
Read PostLike
Foma2
11 April 2020
3
Apr 11, 2020 9:45 am
Thanks for your advice. I already have plastic guards but leaves still make their way into the gutters. So, I need to clean them anyway.
Thanks for your advice. I already have plastic guards but leaves still make their way into the gutters. So, I need to cl...
Read PostLike
Foma2
10 April 2020
1
Apr 10, 2020 1:28 pm
I am just wondering how you clean your gutters ? I have a very narrow gap above gutters between the house and pergola. The gap is 2cm wide and I cannot remove leaves from it. Other gutters are not wide either. They are around 5..6cm wide so I am really struggling to remove leaves from them as well. ...
I am just wondering how you clean your gutters ? I have a very narrow gap above gutters between the house and pergola. T...
Read PostLike
Foma2
1 April 2016
17
Apr 01, 2016 2:45 pm
Do not worry about left side - it is a different T piece which was actually damaged when I tried to use clamps - it was a wrong decision.That's why I said - use your own hands.I have it in place for two weeks by now, no issues at all. ::lol:: I dont understand but if it works and you're happy, all ...
I dont understand but if it works and you're happy, all good. The T piece on the photo is not the one I used. The the o...
Read PostLike
Foma2
1 April 2016
14
Apr 01, 2016 11:58 am
The OPs fix is a real clanger - just look at the left side with the dent in it in his first pic, no way is he going to get a fitting on there and make it seal properly. Do not worry about left side - it is a different T piece which was actually damaged when I tried to use clamps - it was a wrong de...
Do not worry about left side - it is a different T piece which was actually damaged when I tried to use clamps - it was...
Read PostLike
Foma2
28 March 2016
10
Mar 28, 2016 4:30 pm
Hi everyone. I managed to get what I want with my own hands ... and a car jack handle. I just pushed a centre of the T piece against the desk while pushing the end of the pipe down. Just be careful not to change shape of the end of the pipe, otherwise you will not be able to pull a nut on it. It wor...
Hi everyone. I managed to get what I want with my own hands ... and a car jack handle. I just pushed a centre of the T p...
Read PostLike
Foma2
15 March 2016
9
Mar 15, 2016 9:00 pm
Thanks, guys.
Thanks, guys.
Read PostLike
Foma2
15 March 2016
3
Mar 15, 2016 7:06 am
Thanks for your response. My concern is that there is a a T piece which is soldered to the copper pipe. If I heat the copper, will I damage the soldering ?
Thanks for your response. My concern is that there is a a T piece which is soldered to the copper pipe. If I heat the co...
Read PostLike
Foma2
14 March 2016
1
Mar 14, 2016 8:38 pm
Hi everyone. I have a t-shaped half inch copper pipe. I need to bend it a bit the way shown on my sketch. Can you please let me know how I can do it without kinking the pipe. Thank you. ::smile:: http://i1127.photobucket.com/albums/l639/Foma2/How%20to%20bend%20a%20short%20copper%20pipe/HTBSCP001.jpg...
Hi everyone. I have a t-shaped half inch copper pipe. I need to bend it a bit the way shown on my sketch. Can you please...
Read PostLike
Foma2
10 February 2016
2
Feb 10, 2016 7:38 pm
Another thing I wanted to ask is if it is worth gluing a piece of gyprock above the crack ? I know it won't add much strength to the panel but probably somehow it will prevent it from getting bigger providing the applied force won't be too strong.
Another thing I wanted to ask is if it is worth gluing a piece of gyprock above the crack ? I know it won't add much str...
Read PostLike
Foma2
9 January 2016
14
Jan 09, 2016 10:35 am
We are currently dealer with Consumer Affairs and the Building Commission and I have to admit they seem useless. ... Good luck getting the builder to do anything, it really does seems they have a law of their own Last week I had a chat with my friend's brother. He lives in Canada. From what he said...
Last week I had a chat with my friend's brother. He lives in Canada. From what he said I can say that in Canada they ha...
Read PostLike
Foma2
9 January 2016
13
Jan 09, 2016 10:28 am
Hi everyone. Just a quick update on what I've done more than a year ago. As I said above I had to dig next to the high pressure pipe entrance point. Got it fixed installing a new coupler, dug a green box so that a coupler itself is nit surrounded by the soil and no roots can make their way into it e...
Hi everyone. Just a quick update on what I've done more than a year ago. As I said above I had to dig next to the high p...
Read PostLike
Foma2
26 October 2015
4
Oct 26, 2015 6:41 pm
<erroneous entry>
erroneous entry
Read PostLike
Foma2
22 March 2013
4
Mar 22, 2013 11:59 am
Thanks for advise.
Thanks for advise.
Read PostLike




Australia's largest home building and
renovation community
Homeone
About

Terms
Privacy

Follow homeone on FacebookFollow homeone on Twitter
All comments made express the views and opinions of the author and not the Administrators, Support nor Homeone Australia & New Zealand
© Homeone Australia & New Zealand All Rights Reserved ‎2001 - 2025